Kuvaus

The EBC Double-H Sintered brake pads are the standard in sintered pads. These brake pads are long lasting and offer quick reaction time & biting stopping performance and both dry and wet conditions. ECE R 90 brake safety approved. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.Front: BMW : 88-91 K100 LT Sept. 1988-1991 (8 Valve – ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 88-91 K100 LT Sept. 1988-1991 (8 Valve – Non ABS Models) 88-89 K100 RS Oct. 1988-1989 (8 Valve – ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 88-89 K100 RS Oct. 1988-1989 (8 Valve – Non ABS Models) 88-89 K100 RT Oct. 1988-1989 (8 Valve – ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 88-89 K100 RT Oct. 1988-1989 (8 Valve – Non ABS Models) 88-90 K100/2 Sept. 1988-1990 (8 Valve – ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 88-90 K100/2 Sept. 1988-1990 (8 Valve – Non ABS Models) 88-90 K75 C Sept. 1988-1990 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 89-96 K75 RT (ABS Model – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 89-96 K75 RT (Non ABS Models) 88-95 K75 S Sept. 1988-1995 (ABS Model – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 88-95 K75 S Sept. 1988-1995 (Non ABS Models) 90-96 K75/75-2 Aug. 1990-1996 (ABS Model – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 88-96 K75/75-2 Sept. 1988-1996 (Non ABS Models) 90-92 R100 RS 1990-Sept 1992 88-89 R100 RS Sept. 1988-Aug. 1989 88-89 R100 RT Sept. 1988-Aug. 1989 89-95 R100 RT Sept. 1989-1995 89-95 R80/R 80 RT Sept. 1988-1995 (Double rotor) 88 R80/R 80 RT (Sept. 1988-1995 – Double rotor)