Kuvaus

The EBC Double-H Sintered brake pads are the standard in sintered pads. These brake pads are long lasting and offer quick reaction time & biting stopping performance and both dry and wet conditions. ECE R 90 brake safety approved. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.Front: BMW : 88-93 K1 (16 Valve – ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 88-93 K1 (16 Valve – Non ABS Models) 89-92 K100 RS (16 Valve – ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 89-92 K100 RS (16 Valve – Non ABS Models) 89-93 K1100 LT 1989-1999 (ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 89-93 K1100 LT 1989-1999 (Non ABS Models) 92-96 K1100 RS (ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 92-96 K1100 RS (Non ABS Models) 98-00 K1200 LT 1997-Oct. 2000 (Integral ABS & STD ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 97 K1200 LT 1997-Oct. 2000 (Integral ABS & STD ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 96-00 K1200 RS (ABS & Non ABS Models – Remove rotor outer ring from centre casting and refit. ) 93-96 R100 Mystic 91-95 R100 R 93-99 R1100 GS (STD & ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 94-96 R1100 R 1993-May 1996 (Spoke wheel) 93-01 R1100 R (Cast Wheel – Remove rotor outer ring from centre casting and refit. ) 92-01 R1100 RS (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 94-01 R1100 RT (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 94-01 R1100 RT (Spoke wheel) 96-00 R1100 S 1996-Nov. 2000 (ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 98 R1150 GS R21/0415/0495 (1998-Oct. 2001 – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 99-01 R1150 GS R21/0415/0495 – 1998-Oct. 2001 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 00-02 R1200 Independent (Cast wheel) 00-02 R1200 Independent (Spoke wheel) 96-02 R1200 C (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 96-02 R1200 C (Spoke Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 94-95 R80 Mystic 91-94 R80 R 97-00 R850 C (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 97-00 R850 C (Spoke Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 96-00 R850 GS (STD & ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place. Remove outer ring fom centre casting and refit.) 94 R850 R (1994-May 1996 – Spoke wheel) 94-02 R850 R (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 95-96 R850 R – 1994-May 1996 (Spoke wheel) 96-01 R850 RT (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 96-01 R850 RT (Spoke wheel)