Kuvaus

The EBC Double-H Sintered brake pads are the standard in sintered pads. These brake pads are long lasting and offer quick reaction time & biting stopping performance and both dry and wet conditions. ECE R 90 brake safety approved. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.Front: BMW : 00 K1200 LT Nov. 2000-2007 (K589 5mm Disc-With & Without Integral ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 01-07 K1200 LT Nov. 2000-2007 K589 (5mm Disc-With & Without Integral ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 08-09 K1200 LT (Evo-Integral ABS – Disc has fixed bobbins – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 05 K1200 R K27/0378 (Nov. 2005-Nov. 2007 – Tokico caliper – Disc has loose bobbins – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 06-07 K1200 R K27/0378/Tokico Caliper – Nov. 2005-Nov. 2007 (Disc has loose bobbins – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 07-10 K1200 R Sport K43 (5mm-Disc has fixed bobbins – Fitting kit required) 12 K1300 R Carbon (Disc has fixed bobbins – Fitting kit required) 11-15 K1300 R Dynamic (Disc has fixed bobbins – Fitting kit required) 09-12 K1300 R (Disc has fixed bobbins – Fitting kit required) 00-06 R1100 S Dec. 2000-2006 (With Integral ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 01 R1150 GS Adventure Evo R21A 0441/0492 (July-2001-2006 – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 02-06 R1150 GS Adventure Evo R21A 0441/0492 – July 2001-2006 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 01 R1150 GS Evo R21/0415/0495 (Nov. 2001-2003 – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 02-03 R1150 GS Evo R21/0415/0495 – Nov. 2001-2003 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 03-06 R1150 R Rockster 04 R1150 R Rockster Edition 80 01-06 R1150 R 01-04 R1150 RS (Integral ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 03-04 R1200 C Classic (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 03-04 R1200 C Independent (Cast Wheel – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 04 R1200 C Montauk (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 02-04 R1200 CL (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 11-13 R1200 R Classic (Disc has fixed bobbins Fitting kit required) 06-07 R1200 R K27/0378 (Disc has fixed bobbins – Fitting kit required) 07 R1200 R K27/0378 (Dec.2007-2014 – Disc has fixed bobbins – Fitting kit required) 08-13 R1200 R K27/0378 – Dec. 2007-2014 (Disc has fixed bobbins – Fitting kit required) 10-11 R1200 R SE (Disc has fixed bobbins – Fitting kit required) 04-06 R850 R Front: Kawasaki: 98-01 ZRX 400 ZX 400