Kuvaus

The EBC brake pads have great predictable stopping power. and they benefit from low disc abrasion and dust. They are brake rotor friendly. and slower to brake in the wet. These organic brake pads are ECE R 90 brake safety test approved. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.Front: BMW : 88-93 K1 (16 Valve – ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 88-93 K1 (16 Valve – Non ABS Models) 89-92 K100 RS (16 Valve – ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 89-92 K100 RS (16 Valve – Non ABS Models) 89-93 K1100 LT 1989-1999 (ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 89-93 K1100 LT 1989-1999 (Non ABS Models) 92-96 K1100 RS (ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 92-96 K1100 RS (Non ABS Models) 98-00 K1200 LT 1997-Oct. 2000 (Integral ABS & STD ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 97 K1200 LT 1997-Oct. 2000 (Integral ABS & STD ABS Models – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 96-00 K1200 RS (ABS & Non ABS Models – Remove rotor outer ring from centre casting and refit. ) 93-96 R100 Mystic 91-95 R100 R 93-99 R1100 GS (STD & ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 94-96 R1100 R 1993-May 1996 (Spoke wheel) 93-01 R1100 R (Cast Wheel – Remove rotor outer ring from centre casting and refit. ) 92-01 R1100 RS (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 94-01 R1100 RT (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 94-01 R1100 RT (Spoke wheel) 96-00 R1100 S 1996-Nov. 2000 (ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 98 R1150 GS R21/0415/0495 (1998-Oct. 2001 – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 99-01 R1150 GS R21/0415/0495 – 1998-Oct. 2001 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 00-02 R1200 Independent (Cast wheel) 00-02 R1200 Independent (Spoke wheel) 96-02 R1200 C (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 96-02 R1200 C (Spoke Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 94-95 R80 Mystic 91-94 R80 R 97-00 R850 C (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 97-00 R850 C (Spoke Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 96-00 R850 GS (STD & ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place. Remove outer ring fom centre casting and refit.) 94 R850 R (1994-May 1996 – Spoke wheel) 94-02 R850 R (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 95-96 R850 R – 1994-May 1996 (Spoke wheel) 96-01 R850 RT (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 96-01 R850 RT (Spoke wheel)