Kuvaus

EBC V-Pads are Semi-Sintered brake pads that combine the highest qualities of an organic brake pad with the endurance of a sintered equivalent brake pad. The Vee brake pad range are designed for the heavy cruiser/streetbike market as a replacement brake pad. Low heat generation and offer reduced rotor galling and extended life and can be used to replace organic or sintered brake pads. ECE R 90 approved. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.Rear: BMW : 05-09 HP2 Enduro 10-11 K1300 GT SE (Disc has fixed bobbins – Fitting kit required) 09-11 K1300 GT (4.5mm thick disc. Fitting kit required. Check disc thickness) 16-20 R Nine T Café Racer K32/1170cc (Disc has fixed bobbins – Fitting kit required) 14-20 R Nine T K21/1170cc (Disc has fixed bobbins – Fitting kit required) 16-21 R Nine T Pure K22/1170cc (Disc has fixed bobbins-fitting kit required) 16-21 R Nine T Scrambler K21/1170cc (Disc has fixed bobbins-fitting kit required) 17-21 R Nine T Urban GS (K33/1170cc) (Disc has fixed bobbins-fitting kit required) 20-21 R Nine T /5 K21/1170cc (Disc has fixed bobbins-fitting kit required) 93-99 R1100 GS (STD & ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 94-96 R1100 R 1993-May 1996 (Spoke wheel) 93-01 R1100 R (Cast Wheel – Remove rotor outer ring from centre casting and refit. ) 94-01 R1100 RT (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 94-01 R1100 RT (Spoke wheel) 96-00 R1100 S 1996-Nov. 2000 (ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 00-06 R1100 S Dec. 2000-2006 (With Integral ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 00-06 R1100 S Dec. 2000-2006 (Without Integral ABS) 01 R1150 GS Adventure Evo R21A 0441/0492 (July-2001-2006 – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 02-06 R1150 GS Adventure Evo R21A 0441/0492 – July 2001-2006 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 01 R1150 GS Evo R21/0415/0495 (Nov. 2001-2003 – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 02-03 R1150 GS Evo R21/0415/0495 – Nov. 2001-2003 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 98 R1150 GS R21/0415/0495 (1998-Oct. 2001 – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 99-01 R1150 GS R21/0415/0495 – 1998-Oct. 2001 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 03-06 R1150 R Rockster 04 R1150 R Rockster Edition 80 01-06 R1150 R 01-04 R1150 RS (Integral ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 00-06 R1150 RT (Integral ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 00-02 R1200 Independent (Cast wheel) 00-02 R1200 Independent (Spoke wheel) 03-04 R1200 C Classic (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 03-04 R1200 C Independent (Cast Wheel – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 04 R1200 C Montauk (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 96-02 R1200 C (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 96-02 R1200 C (Spoke Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 11-13 R1200 R Classic (Disc has fixed bobbins Fitting kit required) 06-07 R1200 R K27/0378 (Disc has fixed bobbins – Fitting kit required) 07 R1200 R K27/0378 (Dec.2007-2014 – Disc has fixed bobbins – Fitting kit required) 08-13 R1200 R K27/0378 – Dec. 2007-2014 (Disc has fixed bobbins – Fitting kit required) 06 R1200 S K29/0366 (Nov-2006-2007 – Discs have loose bobbins) 07 R1200 S K29/0366 (Dec. 2007-2008 – Disc has fixed bobbins – Fitting kit required) 07 R1200 S K29/0366 – 2006-Nov. 2007 (Discs have loose bobbins) 08 R1200 S K29/0366 – Dec. 2007-2008 (Disc has fixed bobbins – Fitting kit required) 07 R1200 ST K28/0328 (Dec-2007-2008 – Disc has fixed bobbins – Fitting kit required) 03 R1200 ST K28/0328 (Nov-2003-2007 – Discs have loose bobbins) 04-07 R1200 ST K28/0328 – 2003-Nov. 2007 (Discs have loose bobbins) 08 R1200 ST K28/0328 – Dec. 2007-2008 (Disc has fixed bobbins – Fitting kit required) 97-00 R850 C (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 97-00 R850 C (Spoke Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 96-00 R850 GS (STD & ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place. Remove outer ring fom centre casting and refit.) 94 R850 R (1994-May 1996 – Spoke wheel) 94-02 R850 R (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 04-06 R850 R 95-96 R850 R – 1994-May 1996 (Spoke wheel) 96-01 R850 RT (Cast Wheel – ABS – Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.) 96-01 R850 RT (Spoke wheel) 06 R850 RT