Sulje
0
0,00 € 0 tuotetta

Ostoskori on tyhjä.

Odottaa tuotekuvaa

EBC V-pad Semi Sintered brake pads

26,22 €

Tuotetunnus (SKU): m8110718 Osasto: Avainsana tuotteelle

Kuvaus

EBC V-Pads are Semi-Sintered brake pads that combine the highest qualities of an organic brake pad with the endurance of a sintered equivalent brake pad. The Vee brake pad range are designed for the heavy cruiser/streetbike market as a replacement brake pad. Low heat generation and offer reduced rotor galling and extended life and can be used to replace organic or sintered brake pads. ECE R 90 approved. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Arviot

Tuotearvioita ei vielä ole.

Kirjoita ensimmäinen arvio tuotteelle “EBC V-pad Semi Sintered brake pads”

Sähköpostiosoitettasi ei julkaista. Pakolliset kentät on merkitty *

Lisätiedot

Rear: BMW : 98-00 K1200 LT 1997-Oct. 2000 (Integral ABS & STD ABS Models - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 97 K1200 LT 1997-Oct. 2000 (Integral ABS & STD ABS Models - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 00 K1200 LT Nov. 2000-2007 (K589 5mm Disc-With & Without Integral ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 01-07 K1200 LT Nov. 2000-2007 K589 (5mm Disc-With & Without Integral ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 08-09 K1200 LT (Evo-Integral ABS - Disc has fixed bobbins - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 02-04 R1200 CL (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.)