Kuvaus
Enabels H-D models, equipped with the J1850-bus system, to control instruments and indicator lights. ABE approved. The M-CAN connector connects the Motoscope Speedo and fits straight into the OBD (data link interface/on-board diagnostic port) plug, which is normally used to read-out throuble codes on 04-11 HD-models with 3-pin connector. You will not trigger any trouble codes. Note: Will feed speed, RPM and trouble codes only. Other indicator lights must be taken from the bike's wiring harness. Note: Not compatible with CAN-bus (HD-lan) models.
Arviot
Tuotearvioita ei vielä ole.