Cult-Werk, XL 'Old School' rear fender. Matte black

Kuvaus

Unpainted matte black finish. ABS construction, based on the stock Sportster fender but shortened and 50mm lower. This enables the builder to install this fender and get a cool low look without actually lowering the bike. Installs like stock, requires no other modifications and will take up to a 180 series rear tire. Repl. 59865-10 rear fender. Comes with approval. Note: Fender will sit 50mm lower than stock. Note: The ABS material of this fender is not reinforced. Use with a solo seat only. It will not allow carrying the extra weight of a passenger. Note: Compatible with XL1200X Forty-Eight solo seat. Note: After installation it is advised to do a spring-travel check. If required use 963041 travel limiters to help avoid tire to fender contact. Note: Requires the fender struts to be cut. Cult-Werk's smooth clean ABS fender strut covers are available as 963042. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.