EBC V-pad Semi Sintered brake pads

Rear: BMW : 05-09 HP2 Enduro; 10-11 K1300 GT SE (Disc has fixed bobbins - Fitting kit required); 09-11 K1300 GT (4.5mm thick disc. Fitting kit required. Check disc thickness); 16-20 R Nine T Café Racer K32/1170cc (Disc has fixed bobbins - Fitting kit required); 14-20 R Nine T K21/1170cc (Disc has fixed bobbins - Fitting kit required); 16-21 R Nine T Pure K22/1170cc (Disc has fixed bobbins-fitting kit required); 16-21 R Nine T Scrambler K21/1170cc (Disc has fixed bobbins-fitting kit required); 17-21 R Nine T Urban GS (K33/1170cc) (Disc has fixed bobbins-fitting kit required); 20-21 R Nine T /5 K21/1170cc (Disc has fixed bobbins-fitting kit required); 93-99 R1100 GS (STD & ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 94-96 R1100 R 1993-May 1996 (Spoke wheel); 93-01 R1100 R (Cast Wheel - Remove rotor outer ring from centre casting and refit. ); 94-01 R1100 RT (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 94-01 R1100 RT (Spoke wheel); 96-00 R1100 S 1996-Nov. 2000 (ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 00-06 R1100 S Dec. 2000-2006 (With Integral ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 00-06 R1100 S Dec. 2000-2006 (Without Integral ABS); 01 R1150 GS Adventure Evo R21A 0441/0492 (July-2001-2006 - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 02-06 R1150 GS Adventure Evo R21A 0441/0492 - July 2001-2006 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 01 R1150 GS Evo R21/0415/0495 (Nov. 2001-2003 - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 02-03 R1150 GS Evo R21/0415/0495 - Nov. 2001-2003 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 98 R1150 GS R21/0415/0495 (1998-Oct. 2001 - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 99-01 R1150 GS R21/0415/0495 - 1998-Oct. 2001 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 03-06 R1150 R Rockster; 04 R1150 R Rockster Edition 80; 01-06 R1150 R; 01-04 R1150 RS (Integral ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 00-06 R1150 RT (Integral ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 00-02 R1200 Independent (Cast wheel); 00-02 R1200 Independent (Spoke wheel); 03-04 R1200 C Classic (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 03-04 R1200 C Independent (Cast Wheel - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 04 R1200 C Montauk (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 96-02 R1200 C (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 96-02 R1200 C (Spoke Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 11-13 R1200 R Classic (Disc has fixed bobbins Fitting kit required); 06-07 R1200 R K27/0378 (Disc has fixed bobbins - Fitting kit required); 07 R1200 R K27/0378 (Dec.2007-2014 - Disc has fixed bobbins - Fitting kit required); 08-13 R1200 R K27/0378 - Dec. 2007-2014 (Disc has fixed bobbins - Fitting kit required); 06 R1200 S K29/0366 (Nov-2006-2007 - Discs have loose bobbins); 07 R1200 S K29/0366 (Dec. 2007-2008 - Disc has fixed bobbins - Fitting kit required); 07 R1200 S K29/0366 - 2006-Nov. 2007 (Discs have loose bobbins); 08 R1200 S K29/0366 - Dec. 2007-2008 (Disc has fixed bobbins - Fitting kit required); 07 R1200 ST K28/0328 (Dec-2007-2008 - Disc has fixed bobbins - Fitting kit required); 03 R1200 ST K28/0328 (Nov-2003-2007 - Discs have loose bobbins); 04-07 R1200 ST K28/0328 - 2003-Nov. 2007 (Discs have loose bobbins); 08 R1200 ST K28/0328 - Dec. 2007-2008 (Disc has fixed bobbins - Fitting kit required); 97-00 R850 C (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 97-00 R850 C (Spoke Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 96-00 R850 GS (STD & ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place. Remove outer ring fom centre casting and refit.); 94 R850 R (1994-May 1996 - Spoke wheel); 94-02 R850 R (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 04-06 R850 R; 95-96 R850 R - 1994-May 1996 (Spoke wheel); 96-01 R850 RT (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 96-01 R850 RT (Spoke wheel); 06 R850 RT